BARE-Co Standard Canopy
See: HEAVY DUTY SWING-DOWN REVOLVING BEACON below
  • 45" Wide x 60" Long (1145mm x 1524mm)
  • Moulded from virtually indestructable flexible U.V. stabilised Polyethylene
  • Purpose designed moulding to hug modern hoop type ROP Frames
  • Exclusive Bare-Co Socket Mounting System for Torsion Bars
  • NO mounting bolts pass through moulding
CANOPIES
PART No.
ITEM
DESCRIPTION
B2570
WHITE CANOPY

B2571
GREEN CANOPY
B2572
ORANGE CANOPY
B2573
BLUE CANOPY
B2580
RED CANOPY
MOUNTING KITS

B3600

MOUNTING KIT

Mounts the canopy to HOOP TYPE ROP Frames, CURVED or SQUARE TOP,  both RIGID or FOLDING up to 41 1/2" (1050mm) wide with leg thickness up to
3 3/16" x 2"  (82mm x 51mm)         ILLUSTRATED AT THE TOP
Fits EMF1 Bare-Co ROP Frame


B4620


MOUNTING KIT

Same as B3600 above - EXCEPT fitting is for ROP Frames with
VERY LARGE SECTION LEGS of   4"x 4" (100 x 100),
5"x 2" (125 x 50) or 6"x 2" (150 x 50)


B2565

Fitted to BARE-Co Cross Bar ROP
Fitted to OVERWIDTH Hoop ROP

MOUNTING KIT

Mounts the canopy to OVERWIDTH ROP FRAMES
Cross Bar or Leg width more than 41 1/2" (1050mm) wide.
Leg thickness from 2" x 2" (51 x 51mm) to 2" x 4" (51 x 100mm)

eg. BARE-Co 2 post Cross Bar type ROP frames
and extra wide hoop type ROP frames as fitted to some late Kubota models including 'Grand L' series and FORD tractors.

B4600

MOUNTING KIT

Mounts the canopy to SMALL 4 POST ROP FRAMES

Up to 41 1/2" (1050mm) wide or for adaptation to Non-standard Industrial Applications


HEAVY DUTY SWING-DOWN REVOLVING BEACON

Heavy duty swing-down revolving beacon.
Quick Release knob allows the unit to swing down for working under trees.
This is a heavy duty, industrial quality unit.

Replacement parts available.
Fits all Bare-Co polyethylene canopies
(Standard & Senior)
Part No.
Description
B2568
12 Volt Full Kit (excludes switch & wiring)
B2569
24 Volt Full Kit (excludes switch & wiring)