Yoke Type Safety Clutches
NOTE: Parts shown are BARE-Co parts - original part numbers are shown for reference only.
These European type shaft mounted clutches are of lighter construction than the H/D
gearbox mounted clutches on previous pages. (Equivalent to European BYPY - Walterscheid types).
Yoke Type Disk Safety Clutch

Part No. AK421090
1 3/8" x 6 Splines
180mm (7") dia. suits A421 uni-cross - Torque = 900NM (664 ft-lb)

Part No. AK622125
1 3/8" x 6 Splines
200mm (8") dia. suits A622 uni-cross - Torque = 1200NM (885 ft-lb)

Part No. AK723125
1 3/8" x 6 Splines
200mm (8") dia. suits A723 uni-cross - Torque = 1200NM (885 ft-lb)

European Type Torque Limiter Clutches

These units are only recommended for applications where space is the limiting factor.
Being non-adjustable mechanical pawl type units, life will be limited if subjected to continual overload with lack of lubrication.
NOT RECOMMENDED FOR ROTARY CUTTERS.

Part No. SK42
1 3/8" x 6 Splines
For A421 uni-cross
Torque = 900NM (664 ft-lb)

Yoke Type Safety Clutches