Wide Angle CV Shafts

SPARE PARTS for WB Series: see page PTO 31 / for WW Series see page PTO 43

POWER
RATING

SHAFT SERIES

SHAFT LENGTH
CROSS TO CROSS

PART No.

DESCRIPTION

35hp
26kw
4 series

W2380 SERIES

Non wide angle end yoke
= standard BARE-Co 4 series

Closed 39" (100cm)
Open 65" (165cm)

WB4105

1 3/8" x 6 spline both ends triangle profile drive tube

64hp
48kw
6 series

W2480 SERIES

Non wide angle end yoke
= standard BARE-Co 6 series

Closed 39" (100cm)
Open 65" (165cm)

WB6105

Closed 59" (150cm)
Open 98" (250cm)

WB6150

106hp
79kw
2580 series

Heavy Duty Version
Star Profile Drive Tube
W2580 SERIES

Non wide angle end yoke
= standard BARE-Co/ WALTERSCHEID 2500 series

Closed 39" (100cm)
Open 65" (165cm)

WW36105

1 3/8" x 6 spline both ends star profile drive tube

Closed 59" (150cm)
Open 98" (250cm)

WW36150

Closed 39" (100cm)
Open 65" (165cm)

WW3610521

1 3/8" x 21 spline both ends star profile drive tube

WW3610520

1 3/4" x 20 spline both ends star profile drive tube

Closed 52" (130cm)
Open 81" (205cm)

WE36130

1 3/8" x 6 spline yoke on wide angle end.
No end yoke on the plain end.
Will accept standard yoke from End Yoke Page
Star profile drive tube.

WE3613020

1 3/4" x 20 spline yoke on wide angle end.
No end yoke on the plain end.
Will accept standard yoke from End Yoke Page
Star profile drive tube.

WE3613021

1 3/8" x 21 spline yoke on wide angle end.
No end yoke on the plain end.
Will accept standard yoke from End Yoke Page
Star profile drive tube.

WARNING !
Exceeding 80 degree angle will result in joint ball / socket FAILURE ! (NOT COVERED BY WARRANTY) Tractor turning limiter should be fitted to the implement drawbar