Eng Kits - MF with Perkins Engines
For:MF tractors with Perkins A4-192 / A4-203 / A4-212 engines

Now available with a NEW CRANKSHAFT for little more than a basic regrind for most applications
3 KIT LEVELS
"EK" - FOR IN-FRAME REPAIR. Includes - Pistons, Gudgeon Bushes, Piston Rings, Liners, Con Rod Bearings, Con Rod Lock Nuts (where fitted), Top & Bottom Gasket Sets.

"EKM" - FOR OUT OF FRAME REBUILD. Includes ALL of the above PLUS - Main Bearings (you specify under-size required at NO EXTRA COST), Thrust Washers, Front & Rear Seals.

"EKMC" - same as EKM but INCLUDING A NEW CRANKSHAFT
IMPORTANT
To reduce your Inventory levels, Bare-Co lists VALVE TRAIN KITS separately below the Engine Kit Part Numbers. Valve Train Kits will fit a range of different engine kits.
The Bare-Co QUALITY DIFFERENCE
Semi-finished liners are a no-charge option for most models.
Viton Rear Seals are supplied for most applications
No extra for under-size bearings
The EKMC Kit allows for INSTANT ASSEMBLY with a NEW CRANKSHAFT and Standard Bearings straight out of the box.
New Injector Kits at Repair Prices
APPLICATION
ENGINE
KIT
PISTON/ LINER
(1 Cyl)
RING SET
(1 Cyl)
PISTON
LINER
FINISHED
LINER SEMI
FINISH
A4-192 engine
MF65 MKI
Identify By: 88.92mm bore
EK10
EKM10
EKMC10
Valve Train Kit:
VK16
B2917
B5154
=41158063
745823M91
B6917
=55274
739845M91
B7542
=0530002
731595M1
N/A
AD4-203 engine
DIRECT INJECTION
CHROME LINERS
Flange depth = 1mm
MF65 MKII up to 2939035 -

91.491mm bore
EK12
EKM12
EKMC12
Valve Train Kit:
VK17
New Injector Kit
IJK2
B2632
B2633
=41158058
745819M91
Suit chrome bore
B6146
=68332
743824M91
B7540
=31358308
732638M1
AD4-203 engine
DIRECT INJECTION
CAST LINERS
Flange depth = 4mm
MF65 MKII from 2939036 - Bowl top piston - Cast Iron liner
91.491mm bore

EK13
EKM13
EKMC13

Valve Train Kit:
VK17
New Injector Kit
IJK2
B2146
B2619
=41158057
745818M91
B7541
=31358345
739043M1
B7550
=31358323
734197M1

 

B8550
.030" O/SIZE
AD4-203 engine
MF165
Identify By: exhaust is on LH side, 91.491mm bore
ROPE TYPE REAR SEAL
 ie. up to 203AU109488
AD4-203 engine
MF165
Identify By: exhaust is on LH side, 91.491mm bore
LIP TYPE REAR SEAL
ie. from 203UA109488L
EK13
EKM13
EKMC1310
Valve Train Kit:
VK17
New Injector Kit
IJK2
A4-212 engine
MF165
ROPE TYPE REAR SEAL
ie. up to 212UA187118
Identify By: exhaust is on RH side
Early engines had 3 ring pistons.
Late 4 ring pistons should be used if rebuilding engine
98.476mm bore
EK14
EKM14
EKMC14
Uprates engine to latest 4 ring piston. Valve Train Kits:
STD = VK6
0.003" O/Size
= VK7
B2988
Latest 4 ring type
MUST FIT FULL SET
B2620
Universal ring set
Suits 3 or 4 ring pistons
=41158044
745763M91
41158041
B6988
=86721
783249M91
4 Ring piston
Must fit FULL SET if replacing 3 ring pistons
B7543
=31358441
[flanged liner]
B7547
=31358324
734644M1
A4-212 engine
MF165
LIP TYPE REAR SEAL
ie. from 212UA187118L
Identify By: exhaust is on RH side
Early engines had 3 ring pistons.
Late 4 ring pistons should be used if rebuilding engine.
EK14
EKM14
EKMC1410
Uprates engine to latest 4 ring piston.
Valve Train Kits:
STD = VK6
0.003" O/Size
= VK7
Eng Kits - MF with Perkins Engines

NOTE: Parts shown are BARE-Co parts - original part numbers are shown for reference only.