Dual Clutch
NOTE: Parts shown are BARE-Co parts, original part numbers are shown for reference only.

B9508

B6841

B892
APPLICATION
KIT
Incl. Bearings
COVER
ASSEMBLY
MAIN
DISC
P.T.O.
DISC
THRUST
BEARING
FLYWHEEL
BEARING

820, 920, 1020, 1120, 1520, 2020, 2120
830, 1130, 1530, 1630, 1830, 2630
840, 940, 1040, 1140, 1640, 1840, 2040, 2240, 2255N, 2355, 2355N, 2440, 2640
1350, 1550, 1750, 1850N, 1950N, 2150, 2250, 2450
2155

B1685
Rigid Centre
Organic Disc

Your
option

B1686
Sprung Hub
Organic Disc
B6841
=AL55140
(AL39624)

(Includes
PTO plate)
B6842
=AL23511
Rigid Centre
Organic Disc
11" x 1" x 15 splines

Your
option

B6843
=AL31436
Sprung Hub
Organic Disc
11" x 1" x 15 splines
B6847
=AL19092
(AT21675)
9" x 1 1/2"
x 23 Splines
B892
=AL39541
B890
=JD10107
Dual Clutch models ONLY
USA Models ONLY
5200, 5210, 5300, 5310
5400, 5410, 5415
5500, 5510, 5520
5605, 5615
5705, 5715

WARNING!

B9608
Only available as a FULL UPGRADE KIT
Includes PTO Release Bearing Housing to upgrade models with OMG Clutches
Old clutch MUST BE REMOVED to determine Flywheel type
BEFORE ORDERING... See BELOW
Fits EARLY Smooth Flywheel with 20mm (0.787") Pot Depth
B9508
 Fits LATE Non-Machined Flywheel after machining to 24.6 mm (0.968") Pot Depth

Technical Information - American Built JD 5000 Series
Models: 5200, 5300, 5400, 5500, 5605, 5705, 5210, 5310, 5410, 5510
5415, 5615, 5715, 5220, 5320, 5420, 5403, 5520
Transmission Type: S/R - Sync Reverse
C/S - Collar Shift
TSS - Transmission Sync Shuttle
Double Clutch Identification: 19 Spline Captive Transmission Disc

PTO Bearing Assembly:		  

The LUK clutch requires a shorter PTO bearing collar than other clutches.
Ensure that the LUK clutch is installed with the shorter 28mm PTO bearing collar which is supplied as part of the Bare-Co / LUK clutch kit.
The required PTO disc is determined by the flywheel pot depth.
To select the CORRECT disc for your application, refer to the illustrations below.
Smooth (machined) Flywheel surface
20mm Pot Depth
Order B9608 Clutch Kit
(contains 7mm thick PTO Plate)
Rough (not machined) Flywheel surface
Machine flywheel to 24.6mm Pot Depth as shown to the left.
AFTER MACHINING
Order B9508 Clutch Kit
(contains 12mm thick PTO Plate)
Dual Clutch