Engine Kits and Parts: 4 Cylinder
NOTE: Parts shown are BARE-Co parts - original part numbers are shown for reference only.
4 Cylinder Models (European & US engines)


Gudgeon Bushes are included in JD Engine Kits
THREE KIT LEVELS
"EK" - suits in-frame repair (EXCLUDES main bearings) Includes - Pistons/Liners, Bearings etc.
"EKM" - includes all typical items shown in the illustration above - less crankshaft
"EKMC" - as above but including a new crankshaft
EKMC kits can be held in stock as all components are standard size for instant engine assembly
NOT INCLUDED IN KIT:
(order separately)

IMPORTANT: Con Rod bolts MUST be replaced
after release of tension.
Select correct Spec bolt from CONROD Page
4 Cylinder Models
APPLICATION
ENGINE
TYPE
ENGINE
OVERHAUL
KIT
LINER
INCLUDING
SEALS
PISTON / LINER
KIT (1 CYL)
INCL. 'O' RINGS
RING SET
1 CYLINDER SET (3 RING)
GUDGEON
BUSH
EUROPEAN ENGINES

2020 Up to tractor serial no. 074999
'O' Ring grooved liner
4 - 202D
4 CYL
98mm Bore
EK58
EKM58
EKMC58
B544
=AR51902
B5489
B5496
=AR70633
B5499
=T23471
(30mm I.D.)

2020 From tractor serial no. 075000 plain liner
EK59
EKM59
EKMC59
B545
=T32340
B5490
=AR71591

2120 Up to tractor serial no.074999
'O' Ring grooved liner
4 - 219D
4 CYL
102mm Bore
EK60
EKM60
EKMC60
B546
=AR51903
B5491
B5497
=AR55759

2120 From tractor serial no. 075000 to 199742
(30mm Gudgeon pin plain liner)
EK61
EKM61
EKMC61
B547
=T32343
B5492
=AR71593

2120 From tractor serial no. 199743
1830, 2030 (ALL)
(35mm Gudgeon pin plain liner)
EK62
EKM62
EKMC62
B5493
=AR78041
B5500
=R55647
(35mm I.D.)
2130, 1640, 1840, 2040
2040S, 2250, 2350, 2450, 2550
Confirm short nose 36mm (1.4") or long nose 60mm (2.36") crankshaft for EKMC engine kit.
From No. 155861 = Long Nose
 
4 - 239D
4 CYL
106.5mm Bore
EK63
EKM63
EKMC63
B548
=R90059
R80724
B5494
=RE24458
B5498
=RE15674
2140, 2650, 2850
Confirm short nose 36mm (1.4") or long nose 60mm (2.36") crankshaft for EKMC engine kit.
From No. 155861 = Long Nose
4 - 239T
4 CYL TURBO
106.5mm Bore
EK64
EKM64
EKMC64
B5495
=RE15600
RE22678
B5501
=R57451
(41mm I.D.)
U.S. ENGINES

3010 With block marked R26160 ONLY
Uprates early 4 1/8" bore models to 4 1/4" bore
4 - 270D
4 cyl
4 1/4"
(108mm)
Bore
EK70
EKM70
B549
=R32050
B5502
=RE23173

FIT SET OF 4
for 3010
B5505
=AR55630
B5506
=R30939

3020 With block marked R32020
OR R40850 ONLY

3010 With block marked R40910 OR R46350
OR R46430 ONLY
Uprates early 4 1/8" bore models to 4 1/4" bore
EK71
EKM71
B550
=RE40615
B5503
=RE23170

FIT SET OF 4
for 3010

3020 Up to engine serial no. 122999 with
block marked R46350 OR R46430 ONLY

3020 From engine serial no. 123000
EK72
EKM72
B5504
=RE23165

·Pistons for JD European engines are latest High Ring type. Pistons after early 98mm bore feature:

Ni - resist reinforced ring groove


Molybdenum Keystone Compression Ring

Accumulator Groove
Spring type Chrome Oil Ring

Pistons supplied assembled and fitted to micro honed
centrifugally cast liners

466T - 466A Liners are Induction Hardened.
Engine Kits and Parts: 4 Cylinder