Field Detachable Hose Fittings *
NOTE: Parts shown are BARE-Co parts - original part numbers are shown for reference only.
* FOR SAFETY REASONS DO NOT MIX DIFFERENT BRANDS OF BODIES AND TAILS
FOR 3/8" I.D. DOUBLE WIRE NON SKIVE HOSE (SAE 100R2)
For
3/8"
hose
Thread Type Identification
Outer
Body
Male
Nipple
Female
Swivel
90° Female
Elbow

Thread O.D. (approx) 16.5mm x 19 T.P.I.

B.S.P. THREAD
Male has tapered thread (can seal on thread)
Female has straight thread with seat "A"

 
3/8" BSP Thread
B8058
B8031
B8035
B8038

Thread O.D. (approx) 21mm x 14 T.P.I.

1/2" BSP Thread
B8058
B8033
B8036
B3384

Thread O.D. (approx) 17mm x 18 T.P.I.

N.P.T.F. THREAD
Male tapered thread (sharper thread form than B.S.P.)
Female (hose fittings) rare in AUST/NZ (normally B.S.P.)

3/8" NPTF
B8058
B8053
Normally BSP
(convert if req.)

Thread O.D. (approx) 21mm x 14 T.P.I.

1/2" NPTF
B8058
B3385
Normally BSP

Thread 9/16" x 18 T.P.I.

JIC THREAD
Male has protruding seat angle
Female has pipe-flare seat
See illust "B"

9/16" JIC Thread
B8058
B8041
B8045
B8049

Thread ¾ x 16 T.P.I.

3/4" JIC Thread
B8058
B8042
B8046
B8050
* FOR SAFETY REASONS DO NOT MIX DIFFERENT BRANDS OF BODIES AND TAILS
 ASSEMBLY INSTRUCTIONS FOR FIELD ATTACHABLE HOSE FITTINGS
Lubricate Hose
Thoroughly
Place socket in vice as shown.
Thread hose counter clock-wise
into socket until hose bottoms.
Back off ½ turn.
Lubricate nipple
thoroughly
Thread nipple
clockwise
Field Detachable Hose Fittings *