Hydraulic Hose
NOTE: Parts shown are BARE-Co parts - original part numbers are shown for reference only.
DOUBLE WIRE BRAID—NON SKIVE—SAE 100 R2 AT
Supplied by the METRE

B9330 ¼" I.D. Hose

Max Working Pressure 400 BAR (5800 P.S.I.) Burst Pressure 1600 BAR (23,200 P.S.I.)
B3662 3/8" I.D. Hose

Max Working Pressure 276 BAR (4000 P.S.I.) Burst Pressure 1103 BAR (16,000 P.S.I.)
B3663 ½" I.D. Hose

Max Working Pressure 241 BAR (3,500 P.S.I.) Burst Pressure 966 BAR (14,000 P.S.I.)

B9331 ¾" I.D. Hose

Max Working Pressure 215 BAR (3,120 P.S.I.) Burst Pressure 860 BAR (12,480 P.S.I.)
WARNING: DO NOT MIX COMPONENTS FROM DIFFERENT SUPPLIERS.
Tractor hydraulic systems operate at twenty times the pressure of certified garage air receivers.
POOR WORK PRACTICE COULD RESULT IN SEVERE INJURY OR DEATH.
 ASSEMBLY INSTRUCTIONS FOR FIELD ATTACHABLE HOSE FITTINGS
Lubricate Hose
Thoroughly
Place socket in vice as shown.
Thread hose counter clock-wise
into socket until hose bottoms.
Back off ½ turn.
Lubricate nipple
thoroughly
Thread nipple
clockwise