Mufflers (NON Spark Arresting)
NOTE: Parts shown are BARE-Co parts - original part numbers are shown for reference only.

 

 

 

 

For B1806 :
Inlet ID = 1 1/2"
Inlet OD = 1 5/8"
See SPARK ARRESTING TYPE where required
TRACTOR MODEL
MUFFLER PIPE
SIZE
PART No.
DESCRIPTION

CASE-DAVID BROWN 770, 780, 880, 885
990, 995, 1200, 1210, 1212, 1190, 1290

2" outside
with Shroud
B1504

BAKED ENAMEL ROUND BODY

FIAT 450, 480, 500, 540, 550, 600, 640, 650
WITH AUSTRALIAN (FABRICATED) ELBOW (interchangeable with below)

2" / 2 1/8" I.D.
(interchangeable with below)
B6107

BAKED ENAMEL - 110mm DIA BODY

WITH EUROPEAN (CAST) ELBOW
450, 480, 500, 540, 550, 600, 640, 650, 466, 566, 666, 766, 45-66, 55-66, 60-66, 65-66,
70-66, 80-66, 80-90

(46mm I.D.)
B990

SILENCER ONLY - Baked Enamel Original Type
B9007
 Extension pipe to fit above.
B9008

Clamp (Special) to fit Silencer above.
B9991
COMPLETE WITH EXTENSION PIPE Original Type - Baked Enamel

880, 980, 90-90, 100-90, 110-90, 1300

60mm I.D.
B9990

FORD. DEXTA - SUPER DEXTA

2" INSIDE
B105

90mm (3 1/2") DIA body Painted
B6107

110mm (4 3/8") DIA body Baked Enamel

FORDSON MAJOR

2" OUTSIDE Suplied with shroud
(Cut if shroud not req.)
B1504

140mm (5 1/2") ROUND body -Baked Enamel

FORD 2000, 3000, 4000, 2600, 3600, 4100
4600, 2310, 2610, 2810, 2910, 3610, 3910
4110, 4610
B1620

BAKED ENAMEL
400mm (15 3/4") LONG OVAL BODY

FORD 5000, 5600, 5700, 6600
B1621

BAKED ENAMEL 670mm (26") LONG OVAL BODY

FORD 7000, 7600, 7700, 7710

60mm (2 3/8")
INSIDE
B1622

IHC B250, B275, 414, 374, 384, 444

Uuniversal Inlet
1 7/8" - 2" - 2 1/8"
B105

90mm (3 1/2") DIA BODY (PAINTED)

454, 484, 485, 474, 574, 674, 584, 684, 585
685, 785, 885, 495, 595, 695, 795, 895

60mm (2 3/8")
INSIDE
B1622

LARGE CAPACITY BAKED ENAMEL
670mm (26") LONG OVAL BODY

866, 886, 666, 686, 696, 756, 766, 786, 976, 986

2 7/8" I.D.
B2529

ONLY AVAIL AS SPARK ARRESTOR/ MUFFLER

JD 840, 940, 1040, 1140
(EARLY 1350, 1550, 1750, 1850 WITH 2 BOLT FLANGE)

REPLACES AL31552
B106

UNDER HOOD MUFFLER

1640, 1840, 2040, 2040S, 2450

REPLACES AL35753
B107

2140, 2650, 2850

REPLACES AL35753
B108

1020, 1120, 830, 930, 1030, 1130, 1630
840, 940, 1040, 1140, 1350, 1550, 1750, 1850

2 1/2" I.D.
B1097

VERTICAL OVAL MUFFLER BAKED ENAMEL INLET LENGTH = 80mm (3")

2020, 2120, 1830, 2030, 2130
B1098

VERTICAL OVAL MUFFLER BAKED ENAMEL INLET LENGTH = 165mm (6 1/2")

KUBOTA M7500DT

2" I.D. or 2 1/8" I.D.
(adaptor bush supplied)
B105
HEAVY DUTY BODY 90mm (3 1/2") - PAINTED
 OR use B6107 below *

MASSEY FERGUSON TE20, MF35, 135, 148

 2" I.D. or 2 1/8" I.D.
(adaptor bush supplied)
B6106

EUROPEAN TYPE SMALL 80 mm (3 1/8")BODY
OR use B6107 below *
B105

HEAVY DUTY BODY 90mm (3 1/2") - PAINTED
OR use B6107 below *
B6107
BAKED ENAMEL BODY 110mm (4 3/8")
* Can Replace B105 and B6106 above

MF240, 250, 550, 154, 254
MF65, 165, 168, 175, 178, 185, 188
MF290, 590, 690, 184, 194, 284, 294
B6107
NEW HOLLAND
3435, 3830, 3935, 4030, 4135, 4230, 4430
46mm (1.8") ID
B9991

Complete assembly (Baked Enamel)
B990
=5157240 		Muffler ONLY
B9007
=44905154 		Extension Pipe
B9008
=5116793

Clamp

SAME - ALL MODELS

 2" I.D. or 2 1/8" I.D.
(adaptor bush supplied)
B6107
BAKED ENAMEL BODY 110mm (4 3/8")
* Can Replace B105 and B6106 above

UNIVERSAL FARMLINER ALL MODELS
SEE FIAT (above)
Mufflers (NON Spark Arresting)