Engine Kits - 3 Cylinder Models
Engine Kits - 3 Cylinder Models

Now available with a NEW CRANKSHAFT for little more than a basic regrind for most applications
3 KIT LEVELS
"EK" - FOR IN-FRAME REPAIR. Includes - Pistons, Gudgeon Bushes, Piston Rings, Con Rod Bearings, Con Rod Lock Nuts (where fitted), Top & Bottom Gasket Sets.

"EKM" - FOR OUT OF FRAME REBUILD. Includes ALL of the above PLUS - Main Bearings (you specify under-size required at NO EXTRA COST), Thrust Washers, Front & Rear Seals.

"EKMC" - same as EKM but INCLUDING A NEW CRANKSHAFT
IMPORTANT
To reduce your Inventory levels, Bare-Co lists VALVE TRAIN KITS separately below the Engine Kit Part Numbers. Valve Train Kits will fit a range of different engine kits.
The Bare-Co QUALITY DIFFERENCE
Original heavy duty optional steel top ring groove pistons
included as standard.
Viton Rear Seals are supplied for most applications
No extra for under-size bearings
The EKMC Kit allows for INSTANT ASSEMBLY with a NEW CRANKSHAFT and Standard Bearings straight out of the box.

Application
Engine
Kit
Piston Std.
Less Rings
Ring Set
1 Cyl.
Liner
* See note below
Con Rod
Bearings
[full set]
Gudgeon
Bush
Con Rod
Lock Nut
[each]
IMPORTANT:
For all applications BELOW confirm PISTON LENGTH and PIN DIA.
REASON: upgraded components and exchange engines fitted to many tractors
2000, 2600, 4100
2310, 2610
4.2" Bore
Customer MUST confirm
Piston Length
B2811
=
DJPN6149S
3917464
* B3590
Heavy liner
approx
110.8mm O.D.
B2748
STD

 

B2749
-.010"U/S

 

B2750
-.020"U/S

 

B3373
-.030"U/S
B3883
=
C5NE6207A
81803972
B293
=
3956276
EK27*
EKM27*
EKMC27*
Valve Train Kit:
VK8 - Std.
VK9 0.003" o/size
B2939
=
83910837
Piston Length 127mm
3000, 3600, 3900
4.2" Bore
EK28*
EKM28*
EKMC28*
Valve Train Kit:
VK8 - Std.
VK9 0.003" o/size
B2940
=
D6NN6108L
3910850
Piston Length 129mm
4000, 4600, 4610
4630, 3930, 4110
4130

4.4" Bore
EK29*
EKM29*
EKMC29*
Valve Train Kit:
VK8 - Std.
VK9 0.003" o/size
B2672
=
EONN6108AA
3928178
3928626
Armoured Ring Groove
Piston Length 127mm
B2812
=
DJPN6149W
3917468

 

* B3591
Semi-finished Plain Liner
approx
116.5mm O.D.
=
D7NN6055A
3912946


* B3589
Flanged Liner fully finished
(block needs to be counterbored)
IMPORTANT
For LATE MODELS with
HEADLAND PISTONS.
Replace with FULL SET
of Pistons/Rings
3610, 3910, 3230
3430

4.4" Bore

These Engines identified by having Conrod BOLTS (not nuts)

EK100
*
EKM100
Valve Train Kit:
VK8 - Std.
VK9 0.003" o/size
B2746
=
EDPN-6102-A
3937063
3928621

Armoured Ring Groove
Piston Length 129mm
Fit FULL SETS
B2812
=
DJPN6149W
3917468
Supplied as a PAIR
of bearings
B3744
STD

B3745
-.010"U/S

B3746
-.020"U/S

B3747
-.030"U/S
These Engines Use BOLTS
8035.06 Engine
3 Cyl 100mm bore
[3010S, 4010S, non emissionized engines only. All up to Ser. No. 702576M - 19th Feb 1999]
3435, 3830, 3935, 4135
EK110
*
EKM110
Piston
INCLUDES
Rings

B3061
=1930241
B3062
=1930169
B3063 *
=4770654

Supplied as a PAIR
of bearings

B3068
STD
=1930181

B3069
-0.254mm
(-.010")
=1930182
B3067
38mm
(1 1/2") I.D.
=4766404
(1 req
per rod)
N/A
8035.05 Engine
3 Cyl 104mm bore
4030 3 cyl model
4030 USA 3 cyl orchard model,
4635
EK111
*
EKM111
Piston
INCLUDES
Rings

B3064
=1930186
B3065
=1930191
B3066 *
=4770623
* Liners NOT included in these kits. Order separately if required
Oversize pistons not recommended due to porosity problems with engine blocks.
Normal procedure is to bore block and liner back to standard.
All BARE-Co pistons have HEAVY DUTY STEEL Ring Lands (where originally specified) - FIT FULL SETS.
Engine Kits - 3 Cylinder Models
NOTE: Parts shown are BARE-Co parts - original part numbers are shown for reference only.